ST 2110 Output Settings
The following table lists the ST 2110 Output essence controls and settings:
Input Setting | Default | Description/Values |
|---|---|---|
Name | n/a | (Optional) A unique name for the media essence (up to 63 characters). |
| Media Type | n/a | Displays the media type for the media essence.
|
| Parameters | ||
| Address | n/a | The IP address of the media essence (in dotted-decimal format). This is typically a multicast address to which the ST 2110 data is being sent. |
| Port | n/a | The UDP port of the media essence. Enter a number in the range 1...65,535. |
| RTP Payload | 96 (video) | The RTP Payload of the media essence. [0..127] |
| ToS | 0x88 | The Type of Service (ToS) specifies the desired quality of service (QoS). This value will be assigned to the Type of Service field of the IP Header for the outputs. Important A DiffServ or DSCP (Differentiated Services Code Point) value must be converted to a ToS precedence value. For example, AF41 or DSCP 34 becomes ToS 136. For more information, see RFC2474. Note The ToS setting must be chosen so as to not interfere with Voice over IP systems and other equipment that may reside on your network. For example, when the ToS value for a stream is set to 0xB8, it can interfere with some third party Voice / IP Telephony systems. |
| TTL | 64 | The TTL (Time-to Live for stream packets) specifies the number of router hops that IP packets from this essence are allowed to traverse before being discarded. |
| Audio | ||
| Packet Time | 1ms | (Media Type must be Audio) Select the duration of packets for the audio essence, either:
|
