Skip to main content

Configuring a Destination Profile

Before starting a Live session, destination profiles need to be configured so that they can then be selected.
You can connect to the interface using an Ethernet or Wi-Fi connection, but also from your smartphone.

See Accessing the Web Interface from a Smartphone to configure destination profiles (adding / editing).

  1. Once connected to the interface, tap AR_menu.png > Streaming > Destination > Add Profile.

  2. Configure the destination server’s settings.

  3. Tap Add.

Note on Destination profile settings

  • These settings may have been changed by the system administrator.

  • Enable the Auto-connect option to automatically connect to a receiver when the unit is powered on.

  • To connect a Hub360
    - Please refer to Hub 360 User's Guide to connect a transmitter to a Hub360.
    - Auto-connect toggle (Enable/Disable)

  • To connect a StreamHub
    IP address or Hostname
    - Input assignment on the StreamHub (Automatic Assignment possible)
    - Auto-connect toggle (Enable/Disable)
    - Port used. Default: 7900
    - Username. Default: aviwest
    - Password. Default: safestreams
    - AES key if required

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close