Command Summary and Access Control
The Makito X4 decoder CLI commands are divided in two main groups: operation and administration:
Operation Commands are used to manage video decoding. Operation command effects are immediate but not persistent (i.e., between reboots) unless the current operating configuration is explicitly saved (using the
configcommand).Administration Commands address the security and network configuration. Their effects are persistent but not always immediate; some require system reboot to take effect.
Below is a list of CLI commands and other functionalities supported by the system, the privileges for each role, and their descriptions.
Command | Role | Description | ||
|---|---|---|---|---|
Admin | Operator | Guest | ||
|
|
| Display the current Up Time and CPU/Memory status. | |
|
| " | Manage A/V decoder settings. | |
|
| "get" only | Manage ST 2110 media essences. | |
|
| " | Display current LED status and initiate blinking of Status LEDs on the Makito X4 face-plate in order to help locate the device. | |
|
|
| Generate still images from a picture. | |
|
| " | Manage still image files on the Makito X4 file system. | |
|
| " | Create and manage streams to map decoder inputs to output interfaces. | |
|
|
| Display the current temperature of the unit. | |
Command | Role | Description | ||
|---|---|---|---|---|
Admin | Operator | Guest | ||
Network and Management | ||||
|
| " | Manage configurations on the Makito X4. | |
|
|
| Display the current date. | |
|
|
| Pair and unpair the Makito X4 with a Haivision EMS (Element Management System). | |
|
|
| View, manually control, and save the Ethernet configuration parameters. | |
|
|
| Display the Firmware Build ID, Build Time, and serial number for the Makito X4. | |
|
|
| Set and view the parameters that specify the networking context for the Makito X4, including the IPv4 settings, hostname, and DNS. | |
|
|
| Set and view the IPv6 settings. | |
|
|
| Manage licensed features. | |
|
|
| Configures SNMP by reading and editing the standard SNMP configuration files, and then restarting the SNMP agent ( | |
|
| " | View and manage NMOS configuration. | |
package (for upgrade) |
|
|
| View and manage software packages, including firmware upgrades. |
| " | " | Change the password for a user account. | |
|
|
| Switch the decoder personality between SDI and 2110. | |
| " | " | Manage SMPTE ST 2110 Precision Time Protocol parameters. | |
|
|
| Halt and restart the Makito X4. | |
|
|
| Enable and disable network services, including HTTP, passthrough, snmp, ssh, talkback, telnet, and vf. | |
Security Commands | ||||
|
|
| Manage user accounts for the decoder. | |
|
|
| Enable remote logging of security and administrative events and configure the remote audit ( | |
|
|
| Manage the Advisory Notice and Consent Banner. | |
|
|
| Manage TLS certificates for the Web interface HTTPS server and the secured TLS connection to the remote audit server. | |
|
|
| View and manage administrative login messages. | |
|
|
| Manage security policy settings. | |
|
|
| Manage the user's own authorized SSH public keys. | |
Command | Role | ||
|---|---|---|---|
Admin | Operator | Guest | |
Web access |
|
|
|
Telnet to/from decoder |
|
|
|
Command | Role | Description | ||
|---|---|---|---|---|
Admin | Operator | Guest | ||
iperf |
|
|
| Measure and tune network performance. |
ping |
|
|
| Send packets to network hosts to test a network connection. |
tcpdump |
|
|
| Display TCP/IP and other packets being transmitted or received over a network interface. |
traceroute |
|
|
| Display the route (path) and measure transit delays of packets across an IP network. |
For an overview of system access control on the Makito X4 decoder, see Role-based Authorization.