_Status Settings_MK4
The following table lists the Status settings. Status information can be useful for troubleshooting and may be forwarded to Haivision Technical Support if you are requesting technical support.
Setting | Description |
|---|---|
Personality | (Makito X4 non-rugged Encoder only, with SMPTE 2110 license installed) Select between SDI, SQD (version 1.6 and later), and SMPTE 2110 input. This setting will take effect upon the next reboot. |
Card Status | OK (or error message if applicable). |
Card Type | The type of device, e.g., Makito X4 SDI Encoder. |
Part Number | The Haivision part number for the encoder or decoder, e.g., B-MX4E-SDI4 or S-MX4D-SDI. |
Serial Number | The serial number for this appliance or card. |
Firmware Version | The firmware version of the device, e.g., 1.0.0-23. |
Firmware Date | The firmware release date. |
Hardware Version | The hardware version of the device. |
Hardware Compatibility | -001G or -002G (basic card assembly). |
Carrier Type | (Makito X4 Rugged Encoder only) The interface carrier board. Note In Release 1.2, the number of CVBS inputs supported depends on the Carrier Type. "Makito 4KR" indicates the three-input variant, whereas "Makito 4KR 12G" indicates the four-input variant. |
CPLD Version | The CPLD version of the device. |
Boot Version | The Boot version of the device. |
System Uptime | The length of time the encoder or decoder has been "up" and running (e.g., 4 days 17:42:03). |
Encoding Chipset Load | (Encoder only) The combined video encoding processor usage in percentage% (combining both Hi and Lo streams). |
Temperature | The current board temperature in degrees Celsius. |
