270 Mbps Interface, 720 x 480i video format (29.97/30 Hz) 720 x 576i (25 Hz)
HD-SDI
SMPTE 292M
1,485 Gbps interface
SMPTE 274M
1920 x 1080 video format 1920x1080i (23.98/24/25/29.97/30 Hz) 1920x1080p (23.98/24/25/29.97/30 Hz)
SMPTE 296M
1280 x 720 video format 1280x720p (50/59.94/60 Hz)
3G-SDI
SMPTE 424M (Level A only)
3 Gbps interface
SMPTE 425M
1080p60 video format 1920x1080p (50/59.94/60 Hz)
6G-SDI
SMPTE 2081
Up to 3840 x 2160p (24/25/29.97/30 Hz)
12G-SDI
SMPTE 2082
Up to 3840 x 2160p (50/59.94/60 Hz)
Impedance
SDI
75 Ohms
SMPTE ST 2110 Video Interfaces (IP over SFP+ Input)
SMPTE ST 2110-20
Uncompressed video transport.
Note
The following are not supported in ST 2110:
4 x 1080p59.94/60 ingest (as it is beyond the 10Gbps speed limit of the interface)
4Kp 59.94/60 ingest
HDR metadata
TBD - applicable???
Audio Interfaces
Digital Embedded Audio
SD-SDI
SMPTE-272M
Formatting AES/EBU Audio and Auxiliary Data into Digital Video Ancillary Data Space
HD/3G-SDI
SMPTE 299M
Formatting 24-Bit Digital Audio Format for SMPTE Bit-Serial Interfaces
SMPTE ST 2110 Audio Interfaces (IP over SFP+ Input)
SMPTE ST 2110-30
Audio transport, based onAES67.
AES67 uses IEEE 1588-2008Precision Time Protocol(PTPv2) for clock synchronization.
PTP provides global microsecond accuracy timing of all essences. Synchronization is based on SMPTE 2059.
SMPTE ST 2110-10 PTP
System architecture and synchronization: Individual audio, video andancillary data tracks or clips are carried as separate individual streams, referred to as "essences".
TBD
JavaScript errors detected
Please note, these errors can depend on your browser setup.
If this problem persists, please contact our support.