Starting and Stopping Makito Encoder Streams and Encoders

On the Appliances screen, you can start/stop the individual streams and encoders of your connected Makito Encoders:

1. Click Appliances in the sidebar.
2. Click the

   

   icon next to the Makito Encoder whose streams/encoders you wish to view or start/stop.

The stream panel opens with tabs available for Streams, Video Encoders, or Audio Encoders:

Streams

The Streams tab shows details on the configured Makito Encoder streams including video thumbnail, stream name, stream protocol, encoder summaries, stream status, and start/stop buttons.

Note

• You can use the stream name to determine which streams are generated by Hub 360 and which are created directly on the Makito Encoder.
• If necessary, access the Makito Encoder interface to view detailed status information for your streams or encoders. See Accessing an Appliance Interface for details.

Video Encoders

The Video Encoders tab shows details regarding the encoder cores including video thumbnail, codec, resolution, bitrate, assigned input, status, and start/stop buttons.

Audio Encoders

The Audio Encoders tab shows details regarding the encoder cores including language, assigned input, bitrate, status, and start/stop buttons.

To start/stop streams or encoders:

1. Click the tab of the items you wish to control: Streams, Video Encoders, or Audio Encoders.
2. Either:
   • Click the

     

     or

     

     button next to the stream/encoder you wish to start or stop.
   • Check the checkbox next to the streams/encoders you wish to start or stop, and click the Start or Stop button.
3. After a few seconds, the selected items are started or stopped.