Unit Front Panel (WIP)
The unit front panel provides information about the device and operational status:
***************
The top right status bar informs about network status*************** The side status bar informs about power status and general operation status
*************** In the bottom bar, the **** icon gives information about the device and stream setting used.
The unit panel also allows access to main functions.
The bottom
Configure the unit
Start/stop live
Edit various unit settings
Status Bars
Start a Record
Forward Stored Files 
Configuring Data Bridge
Configuring Network Interfaces
Settings Menu
Settings Menu
The Settings Menu provides the following icons:
Mission Configuration (Optional)
Input/Output Settings
Network Settings
Destination Profiles
Live Profiles
Record Profiles
Forward Settings
SD Card Management
Device Settings
Device Information
Status Bars
On the front panel the status bars on the top and bottom of the panel, icons indicate the unit state. For example:
Available icons and their meanings are shown in the following table.
Status Icon | What it means |
|---|---|
| Battery levels. |
| Bars Pattern selected |
| Black Pattern selected. |
| Circles Pattern selected. |
| Cellular connections and their signal levels. |
| Data bridge enabled/disabled. SeeConfiguring a Data Bridge. |
| Ethernet connections. |
| HDMI input selected but no received stream. |
| HDMI input selected receiving a stream. |
| Intercom communication with master room. See Using the Intercom. |
| Live at startup (if enabled). SeeEnabling/Disabling Auto-Live at Startup. |
| Location (if enabled). See Enabling/Disabling the Unit Location. |
| Missions selected if the unit is linked with a Manager supporting the Story Centric Workflow. SeeSelecting a Story. |
| One or two USB keys and the memory space used. |
| SD card detected and memory space used. |
| SD card in Hot Folder. See Transmitting Files via the Hot Folder. |
| SD card locked. Add, change or remove content on the card cannot be done if locked. Remove SD card and slide the Lock switch on the side of the card. |
| SDI input selected but no received stream. |
| SDI input selected receiving a stream. |
| Unit connected to power supply. |
| Video Return enabled and receiving a stream. See Receiving a Video Return. |
| Wi-Fi connection configured in access point mode. See Configuring a Wi-Fi Access Point. |
| Wi-Fi connection in client mode. |
