Physical Installation

Note

It is strongly recommended professional setup unique to each customer be performed by a Haivision agent. Contact Haivision for additional information.

Required Components

• Power cord

Optional Components

• 3.5 mm audio cable
• Speaker
• Non-wireless Internet connection

Procedure

To connect the Command 360 AD1:

1. Open the box, verify the contents, and visually inspect the items for any shipping damage. If necessary, contact Haivision for return instructions.

2. Unpack the box and position the hardware on a stable work surface. Optionally, mount the device in a server rack.

   

   Note

   The AD1 is an indoor appliance and should be kept in a dry, dust free environment.

   

   Caution

   When mounting in a server rack, refer to your rack vendor's documentation as well as the included rack mount instructions in the rail kit provided with your system. Improper rack mounting could cause serious harm to equipment and/or people near the rack. Please be sure to properly and securely mount your hardware.

   Ensure that the final location has proper airflow. Do not block or impede airflow to the vents.

   ATTENTION: Lors du montage dans un rack de serveurs, reportez-vous à la documentation du fournisseur de votre rack ainsi qu'aux instructions de montage dans un rack incluses dans le kit de rails fourni avec votre système. Un montage incorrect en rack peut causer de graves dommages à l'équipement et/ou aux personnes à proximité. Assurez-vous de monter correctement et en toute sécurité votre matériel.

   Assurez-vous que l’emplacement final dispose d’une bonne circulation d’air. Ne bloquez pas et n’empêchez pas le flux d’air vers les bouches d’aération. 

3. On the device:

   • Connect a network cable to LAN port.

     

     Note

     Wireless connectivity is not supported on this system.

   • Connect the power cord to the unit.

Once the AD1 is powered on, the power left LED on the front of the unit illuminates. Command 360 software will auto-discover the AD1. 

Setup of the AD1 is now complete. See "Adding an Audio Decoder" in the Command 360 User's Guide for instructions on adding an AD1 to a Room.